C1.1) How to update your device (requires a standard web browser)
-----------------------------------------------------------------
Please Note:
The update described below will NOT change the current configuration settings!
Reverting to Factory Defaults is not needed but recommended.

1. Open a browser and type the IP address announced into the URL field and hit
   the ENTER key.


http://10.1.0.***/update.html


2. Click on the UPDATE button to enter the update page.
3. Click on "Please click here to continue" to launch the update process.
   The device will restart in a special mode called Bootloader showing a
   number counting down. Upon start up the following screen appears ready
   for the update process.
   (The word Browse may differ depending on browser and language).
____________________________________________________
Update  Barix Bootloader version date               |
                                                    |
---------------------------------------------       |
Resource                               Browse       |
                                       Upload       |
                                       Reboot       |
---------------------------------------------       |
                                                    |
Advanced Update                                     |
---------------                                     |
____________________________________________________|

4. To update the software click "Browse" to locate the file you want to upload.
   Browse to the folder "update_rescue" and choose the file compound.bin.
5. Once selected, click "Upload". This process can take a few minutes.
   After a successful upload click the "update" link and when the Update
   window reappears click the "Reboot" button or if there is no button, click
   Browse and select the file "reboot". The device will reboot with the new
   firmware.

    screen.